Hillenbrand Hill-Rom P1440 Скачать руководство пользователя страница 29

Страница: 29 / 40

Accessories

Removable IV Pole (P1445A)

WARNING:

Do not exceed the load capacity of
the removable IV pole. If the
removable IV pole is overloaded,
personal injury or equipment damage
could occur.

WARNING:

Failure to properly secure the
removable IV pole could allow it to
fall, resulting in personal injury or
equipment damage.

WARNING:

Uneven loading of the removable IV
pole could allow the contents to fall,
resulting in personal injury or
equipment damage.

The IV pole is a removable telescopic
pole that installs in any of the four
equipment sockets on the bed.

Troubleshooting

Bed Overheats or Shuts Down After Extensive Operation

The Basic Care™ Bed protects itself from overheating. To help make sure overheating
does not occur, do the following during clinical tasks:

•

Do not run the motors more than necessary.

•

Do not run more than two functions at once.

If the bed shuts down after extensive operation, do the following:

1. Unplug the bed from its power source.

2. Allow 20 minutes for the bed to cool.

3. Plug the bed into an appropriate power source.

4. If the problem still exists, call Hill-Rom Technical Support for assistance.

Part Number

Description

P1445A

Removable IV pole

Содержание Hill-Rom P1440









































Результаты поиска

Содержание Hill-Rom P1440

Отзывы:

Бренды по названию

Популярные бренды

Hillenbrand Hill-Rom P1440, Руководство пользователя

Результаты поиска

Содержание Hill-Rom P1440

Отзывы:

Бренды по названию

Популярные бренды