manualshive.com logo in svg

Hillenbrand Hill-Rom P1440, Руководство пользователя

Поделиться
Скачать
Hillenbrand Hill-Rom P1440 Скачать руководство пользователя страница 12

6

Raising and Lowering the TuckAway Siderails

WARNING:

Evaluate patients for entrapment risk according to facility protocol, and monitor 
patients appropriately.

WARNING:

Evaluate patients for entrapment risk according to facility protocol, and monitor 
patients appropriately. Make sure all siderails are fully latched when in the raised 
position. Failure to do either of these could result in serious injury or death.

NOTE:
Siderails are intended to be a reminder to the patient of the unit’s edges, not a patient-
restraining device. When appropriate, Hill-Rom recommends that medical personnel 
determine the proper methods necessary to make sure a patient remains safely in bed.

WARNING:

Use of a mattress overlay reduces the effective height of the siderails above the 
sleep surface. When using a mattress overlay, evaluate the patient for the risk of 
falls, and take appropriate measures. Failure to do so could result in patient injury.

When the bed is occupied, the siderails should be in the raised position. 

Raising a Siderail

1. Pull the siderail out from under the bed.

2. Rotate the siderail up to the raised position 

until a click is heard.

Lowering a Siderail

1. Pull the Pull siderail release lever.

2. Rotate the siderail down to the lowered 

position.

3. Push the siderail under the bed to the 

stored position.

Содержание Hill-Rom P1440









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды