manualshive.com logo in svg

Hillenbrand Hill-Rom P1440, Руководство пользователя

Поделиться
Скачать
Hillenbrand Hill-Rom P1440 Скачать руководство пользователя страница 22

16

Mattress

WARNING:

Mattresses that are undersized for the frame create a gap between the mattress 
and the siderails. The risk increases for patient entrapment or suffocation. 
Evaluate patients for vulnerability, and monitor patients appropriately. Failure to 
do so could result in patient injury or death.

WARNING:

Even when the surface is appropriately sized for the frame, therapy surfaces such 
as air mattresses, are highly conforming and may pose a risk of suffocation. If a 
vulnerable patient is put on a therapy surface, particularly one with a high degree 
of compliance along the siderails, take extra precautions to help prevent 
entrapment. If continuous monitoring is not feasible, consider lowering the 
siderails to eliminate the entrapment area. If a risk of falls from the bed exists, 
place a mat on the floor to absorb impact and help prevent patient injury. Failure 
to do so could result in patient injury.

WARNING:

If the patient remains in the bed when the bedding is changed, do not pull on the 
bedding with excessive force. Patient injury could occur.

WARNING:

Patients should not be allowed to smoke in bed. Sheets and pillows generally do 
not have flame-resistant properties. Personal injury or equipment damage could 
occur.

The Basic Care™ Bed is compatible with the Comfortline® SE Prevention Mattress 
Series and any mattress that complies with the following recommended dimensions:

Mattress width

36" to 37" (91 cm to 94 cm)

Mattress length—standard model

80" to 81" (203 cm to 206 cm)

Mattress length—short model

76" to 77" (193 cm to 196 cm)

Mattress thickness

6" to 7" (15 cm to 18 cm)

Содержание Hill-Rom P1440









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды