manualshive.com logo in svg

Hillenbrand Hill-Rom P1440, Руководство пользователя

Поделиться
Скачать
Hillenbrand Hill-Rom P1440 Скачать руководство пользователя страница 11

5

Instructions for Use

Putting the Bed into the Emergency CPR Position

Putting the Electric Bed Model into the Emergency CPR Position

When activated, the CPR release disengages the head section actuator so that the head 
section may lower to the horizontal position. This function can be used when power is not 
available.

The emergency CPR controls are handles located 
under the sleep deck, between the head end and 
the head end siderails on both sides of the bed.

1. Pull and hold the handle. Hold the handle 

until the head section come to a stop in the 
flat position.

2. Release the handle.

NOTE:
The emergency CPR control handle must be 
continually pulled until the head section of the bed reaches a flat position. Releasing the 
control handle will cause the head section to stop lowering.

The head section actuator is automatically re-enabled after the CPR control handle is 
released.

Putting the Manual Bed Model into the Emergency CPR Position

At the foot end of the bed, use the manual 
controls to rapidly lower the head section 
of the bed (see “Using the Manual 
Caregiver Controls (Manual Bed Model 
Only)” on page 11).

Содержание Hill-Rom P1440









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды