manualshive.com logo in svg

Hillenbrand Hill-Rom P1440, Руководство пользователя

Поделиться
Скачать
Hillenbrand Hill-Rom P1440 Скачать руководство пользователя страница 13

7

Storing the Siderails

The siderails may be stored completely under 
the frame. During patient transfer, storing the 
siderails under the bed frame helps eliminate 
the gap between the bed and the transfer 
vehicle. Storing the siderails also helps reduce 
the overall width of the bed for easier 
mobility.

Using the Siderail Caregiver and Patient Controls (Electric Bed 
Model Only)

WARNING:

Use caution when lowering the bed frame. To avoid injury, keep extremities from 
under the lowering bed frame.

WARNING:

Before lowering the bed, look under the bed to make sure there are no people or 
obstructions under the bed. Failure to do so could result in serious injury or 
equipment damage.

The Head Up/Down, 
Knee Up/Down, and 
Auto Contour patient 
positioning controls are 
located on the patient 
side of the head end 
siderails.

The Hilow control is 
located on the caregiver 
side of the head end 
siderails to keep the 
patient from 
inadvertently starting the 
bed’s hilow function.

Patient positioning controls

Hilow control

Содержание Hill-Rom P1440









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды