Hill-Rom The Vest P205, Руководство пользователя

Страница: 65 / 80

The Vest
®
Airway Clearance System, Model 205 59
User Manual (140643 REV 7)
PROPRIETARY AND CONFIDENTIAL DRAFT 19-DEC-11
Troubleshooting
WARNING:
Only authorized persons should service The Vest
®
Airway
Clearance System, Model 205. Service by unauthorized persons
could cause personal injury or equipment damage.
If service is necessary on The Vest
®
Airway Clearance System,
Model 205, call Hill-Rom Technical Support. For contact information,
refer to the back cover.
Air Pulse Generator Does Not Power On
1. Make sure the Power Cord is fully plugged into the electrical inlet
on the rear panel of the Air Pulse Generator. If necessary, unplug
the Power Cord from the Air Pulse Generator, and then plug it in
again.
2. Make sure the Power Cord is fully plugged into a known-good
outlet.
3. If the problem is not corrected, call Hill-Rom Technical Support.
For contact information, refer to the back cover.
No Air Pulses into the Disposable Garments
1. If the Remote Control is in use, make sure it is firmly connected to
the front panel of the Air Pulse Generator.
2. Make sure the Air Hoses are connected to the disposable garment
and Air Pulse Generator.
3. Make sure the ON button has been pressed.
4. If the problem is not corrected, call Hill-Rom Technical Support.
For contact information, refer to the back cover.
Screen Shows “Please Call for Service” Message
The system has experienced an unexpected event. Do as follows:
1. Unplug the Power Cord from the Air Pulse Generator, and then
plug it in again.
2. If the problem is not corrected, call Hill-Rom Technical Support.
For contact information, refer to the back cover.