manualshive.com logo in svg

Hill-Rom Century+ P1400, Руководство по обслуживанию

Поделиться
Скачать
Hill-Rom Century+ P1400 Скачать руководство пользователя страница 171

4.14  Casters (Beds with Central Brake and Steer)

Chapter 4: Removal, Replacement, and Adjustment Procedures

Page 4 - 46

™ Bed Service Manual (man241)

WARNING:

Powered bed mechanisms can cause serious injury. Operate the bed 
only with persons clear of mechanisms.

3. Lower the bed to the low position using the hilow function.

SHOCK HAZARD:

Unplug the bed from its power source. Failure to do so could result in 
personal injury or equipment damage.

4. Unplug the bed from its power source.

SHOCK HAZARD:

Disconnect the battery backup. Failure to do so could result in personal 
injury or equipment damage.

5. If applicable, disconnect the battery backup (see “Battery Backup Box” on 

page 4-8).

6. Store, pad, and tie the siderails on one side of the bed.

WARNING:

Get additional personnel to help you turn the bed over on the side that 
has the stored siderails. Failure to do so could result in personal injury 
or equipment damage.

7. Lay the bed on its side.

8. To remove the wheel (E) only, use an appropriate size wrench to loosen 

and remove the bolt (D), and separate the wheel (E) from the caster 
assembly.

9. To remove the caster (F), use the 5 mm allen wrench to remove the screw 

(G), and separate the caster (F) from the bed frame tube (H).

Replacement

1. Insert the caster (F) into the bed frame tube (H), and secure it with the 

screw (G).

2. If applicable, install the wheel (E) in the caster assembly, and use an 

appropriate size wrench to secure it with the bolt (D).

Содержание Century+ P1400






















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды