manualshive.com logo in svg

Hill-Rom Century+ P1400, Руководство по обслуживанию

Поделиться
Скачать
Hill-Rom Century+ P1400 Скачать руководство пользователя страница 155

4.9  Hilow Limit Switch

Chapter 4: Removal, Replacement, and Adjustment Procedures

Page 4 - 30

™ Bed Service Manual (man241)

4.9

Hilow Limit Switch

Tools required:

Phillips head screwdriver

Removal

SHOCK HAZARD:

Unplug the bed from its power source. Failure to do so could result in 
personal injury or equipment damage.

1. Unplug the bed from its power source.

SHOCK HAZARD:

Disconnect the battery backup. Failure to do so could result in personal 
injury or equipment damage.

2. If applicable, disconnect the battery backup (see “Battery Backup Box” on 

page 4-8).

3. If necessary, remove the mattress from the bed.

WARNING:

When the head or foot section is folded back, tie it securely to the bed 
frame before working on the bed. Failure to do so could result in 
personal injury or equipment damage.

4. Lift the foot section of the sleep surface, fold it back toward the head end of 

the bed, and tie it to the bed frame securely.

5. Using a phillips head screwdriver, loosen and remove the screw (A) and 

washer (B) from the control box cover (C) (see figure 4-9 on page 4-31).

Содержание Century+ P1400






















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды