Hill-Rom Century+ P1400 Скачать руководство пользователя страница 135

Страница: 135 / 277

4.2 Battery Backup Box

Chapter 4: Removal, Replacement, and Adjustment Procedures

Page 4 - 10

™ Bed Service Manual (man241)

8. Using the wire cutters, cut the wire ties (D) that secure the battery cables

(B) to the bed frame.

9. Using the T25 Torx® head screwdriver, loosen and remove the screws (E)

and lockwashers (F).

10. Lift the battery backup box (A) from the bed frame.

Replacement

1. Install the battery backup box (A) in the bed so that the tab (I) is resting on

the lower lip of the foot channel (G).

2. Install the first screw (E) and lockwasher (F) from underneath the foot

channel (G) and into the tab (I).

3. Install the second screw (E) and lockwasher (F) through the tab (J) and into

the Trendelenburg tube (H).

4. Route the power cords (B) along the right side channel (K), across the

motor mount channel (L), and along the left side channel (M) to the control
board (C).

5. Loosely install wire ties (D), and secure the power cords (B) to the bed

frame.

6. Plug the power cords (B) into the matching connectors on the control board

(C).

7. Pull the power cord (B) slack into the control board (C) box and tighten the

wire ties (D).

8. Using the wire cutters, cut off any excess from the wire ties (D).

9. Install the control board box cover (see “Control Board” on page 4-5).

10. Untie the foot section of the sleep surface, and carefully lower it back

down.

11. If applicable, install the mattress on the bed.

12. Plug the bed into an appropriate power source.

Содержание Century+ P1400






















































































































































































































































































Результаты поиска

Содержание Century+ P1400

Отзывы:

Бренды по названию

Популярные бренды

Hill-Rom Century+ P1400, Руководство по обслуживанию

Результаты поиска

Содержание Century+ P1400

Отзывы:

Бренды по названию

Популярные бренды