Hill-Rom Century+ P1400 Скачать руководство пользователя страница 156

Страница: 156 / 277

4.9 Hilow Limit Switch

Chapter 4: Removal, Replacement, and Adjustment Procedures

™ Bed Service Manual (man241)

Page 4 - 31

Figure 4-9. Hilow Limit Switch

6. Lift the control box cover (C) up, and slide it off the retainers.

7. Disconnect the terminals (I) and wires (D) from the old switch (E) one at a

time, and place them on the appropriate contacts of the new switch. Do this
until all of the terminals are changed.

8. Remove the two screws (F) and the switch bracket (H), being careful not to

lose the spring (G).

9. Remove and discard the old switch (E).

Replacement

1. Insert the new switch (E) onto the switch bracket (H) with the spring (G),

and secure it with the two screws (F).

2. Place the control box cover (C) on the control box. Slide it toward the foot

end of the bed to engage the retainers in the slots.

3. Secure the control box cover (C) with the screw (A) and washer (B).

4. Untie the foot section of the bed frame, and carefully lower it back down.

m241_108

Содержание Century+ P1400






















































































































































































































































































Результаты поиска

Содержание Century+ P1400

Отзывы:

Бренды по названию

Популярные бренды

Hill-Rom Century+ P1400, Руководство по обслуживанию

Результаты поиска

Содержание Century+ P1400

Отзывы:

Бренды по названию

Популярные бренды