Hill-Rom Century+ P1400 Скачать руководство пользователя страница 139

Страница: 139 / 277

4.3 Battery Backup Circuit Board

Chapter 4: Removal, Replacement, and Adjustment Procedures

Page 4 - 14

™ Bed Service Manual (man241)

9. Disconnect the battery cable (D), output cord (E), and power cord (F) from

the circuit board (H).

10. Using the phillips head screwdriver, remove the screw (G) and separate the

circuit board (H) from the battery box (C).

Replacement

1. Install the circuit board (H) on the circuit board supports (I) in the battery

box (C), and secure it with the screw (G).

2. Connect the battery cable (D), output cord (E), and power cord (F) to the

circuit board (H).

3. Install the battery box cover (B) on the battery box (C), and using the T25

Torx® head screwdriver, secure it with the screws (A).

4. Connect the battery backup box by plugging the battery cable into the main

bed control board (see “Battery Backup Box” on page 4-8).

5. Install the control board box cover (see “Control Board” on page 4-5).

6. Untie the foot section of the sleep surface, and carefully lower it back

down.

7. If applicable, install the mattress on the bed.

8. Plug the bed into an appropriate power source.

WARNING:

Powered bed mechanisms can cause serious injury. Operate the bed
only with persons clear of mechanisms.

9. Test the bed functions to ensure they are working properly.

Adjustment

None

Содержание Century+ P1400






















































































































































































































































































Результаты поиска

Содержание Century+ P1400

Отзывы:

Бренды по названию

Популярные бренды

Hill-Rom Century+ P1400, Руководство по обслуживанию

Результаты поиска

Содержание Century+ P1400

Отзывы:

Бренды по названию

Популярные бренды