Hill-Rom Century+ P1400 Скачать руководство пользователя страница 131

Страница: 131 / 277

4.1 Control Board

Chapter 4: Removal, Replacement, and Adjustment Procedures

Page 4 - 6

™ Bed Service Manual (man241)

Figure 4-1. Control Board

6. Lift the control board box cover (B) up, and slide it off the retainers.

7. Remove the connectors (C) from the control board (D).

8. Remove the screw (E), and remove the control board (D) by lifting up and

pulling towards the head end of the bed.

Replacement

1. Insert the control board (D) into the control board box, and secure it with

the screw (E).

2. Connect the connectors (C) to the control board (D).

3. Place the control board box cover (B) on the control board box. Slide it

toward the foot end of the bed to engage the retainers in the slots.

4. Secure the control board box cover (B) with the screw (A).

5. Loosen the two screws under the frame rail, and adjust the bezel.

m241_073

Содержание Century+ P1400






















































































































































































































































































Результаты поиска

Содержание Century+ P1400

Отзывы:

Бренды по названию

Популярные бренды

Hill-Rom Century+ P1400, Руководство по обслуживанию

Результаты поиска

Содержание Century+ P1400

Отзывы:

Бренды по названию

Популярные бренды