Features
18
Affinity® Three Birthing Bed and Affinity® Four Birthing Bed User Manual
(USR025 REV 6)
•
Turn the foot section so the stand is down and, with the knees bent, place it on the floor.
To Install:
•
Grasp the foot section with both
hands.
•
Position the foot section onto the
mounting brackets located on the bed
frame.
•
Lift-Off Foot Section:
While holding
the foot section level, lift and slide it
until the latches securely engage and
a level surface is achieved.
•
Slide-Off Foot Section:
While holding the foot section level, push it until the latches securely engage and
a level surface is achieved.
•
Pull on the foot section to ensure that it is locked into position.
NOTE:
If the foot section is not level, this is an indication that it is not locked into
position.
•
Lift the foot section to the level position and push until the latches
securely engage.
WARNING:
The foot section must be fully secured under the mattress to provide
safe support. Possible personal injury or equipment damage could
occur.
The foot section must be locked into place. Pull to ensure that the latch is
engaged.
Stow and Go™ Foot Section
The Stow and Go™ Foot Section is only available on the Affinity® Four Birthing Bed.
To Remove:
•
Adjust the foot section so that the
top of the mattress is about waist
high.
•
Pivot the foot supports laterally.
•
Fold up the sides of the foot
section mattress.
Foot Section Not Locked Into
Position
Содержание Affinity Four Birthing Bed
Страница 2: ......
Страница 8: ...vi Affinity Three Birthing Bed and Affinity Four Birthing Bed User Manual USR025 REV 6...
Страница 65: ......
