Accessories
Affinity® Three Birthing Bed and Affinity® Four Birthing Bed User Manual
(USR025 REV 6)
29
Full Leg Supports—P7625C and P7634C
Both leg supports are padded with ball joint and pull handles. The P7634C is
telescoping.
To Adjust for Use:
•
Electrically lower the foot section to the lowest position, with the
patient’s legs on the foot section, before placing her legs into the
supports.
•
Both full-leg supports are interchangeable right and left.
•
For leg support installation, place the rod into the steel sockets located
at the point where the foot section attaches to the yoke.
•
Drop them into the sockets, and rotate until you hear the support lock.
•
Rotate the supports so that the black knob faces inboard, toward the patient, and leave the knob loose.
•
For large patients, rotate the black knob outboard, away from the patient.
•
Place the patient’s legs into the supports.
•
Adjust the position by rotating her knees out.
•
Tighten the black knob.
•
Raise the foot section electrically to fill in the popliteal space by pushing the
Foot Up
control. The patient’s
legs should be completely supported.
•
Remove the foot section.
•
Rotate the foot supports up and away from the center of the bed.
NOTE:
Check for pressure points, and make appropriate adjustments.
For
TALL PATIENTS
,
angle the support downward. For
SHORT PATIENTS
, angle the support upward.
The maximum safe working load is 60 lb (27 kg).
Headboards—P3617, P3629, P92-3617 and P93-3617
The P3629 blow-molded headboard is available in five woodgrain laminate options and two color laminate options.
The P3617 contemporary wood headboard and P93-3617 FreedomHill™ wood headboards are available in light
and medium oak stain options. The P92-3617 LibertyHill™ wood headboard is available in wild cherry and dark
cherry stain options. All of the wood headboards are available in all wood finishes.
Instrument Tray—P278B (no longer available)
The instrument tray is designed to optimize the process of performing obstetrical
postpartum procedures. This instrument tray is compatible with lift-off and slide-off foot
sections.
Location:
The instrument tray is located at the foot section of the bed, in the foot
section yoke.
The maximum safe working load is 25 lb (11 kg).
Full Leg Supports
Instrument Tray
Содержание Affinity Four Birthing Bed
Страница 2: ......
Страница 8: ...vi Affinity Three Birthing Bed and Affinity Four Birthing Bed User Manual USR025 REV 6...
Страница 65: ......
