background image

Features

20

Affinity® Three Birthing Bed and Affinity® Four Birthing Bed User Manual 

(USR025 REV 6)

Headboard

The headboard includes built-in handles which aid in steering control and increase 
mobility. The headboard assembly is removable.

To Remove:

Grasp the hand holds firmly, and lift up.

To Install:

Align the headboard sockets with the posts on the bed frame, and 
lower the headboard until it rest on the bed frame.

IV Pole

The bed comes equipped with one IV pole, stored at the head end of the bed on the 
headboard. The IV pole sockets are located at each corner of the bed at the head 
end.

Deploy: 

Remove the IV pole from the holders. Insert the pole into the desired 
socket, and turn clockwise until it drops fully into the socket and locks 
into place.

The maximum safe working load is 25 lb (11 kg).

Labor Grips

Ergonomically correct labor grips comfortably accommodate patients of all sizes. The 
handles are covered with a non-porous, fluid resistant foam that is comfortable for 
mothers to squeeze.

To Activate:

To raise the labor grip, grasp the grip, and rotate it from under the bed 
until it clicks in place.
To lower, pull the release latch, and lower the grip under the bed.

Lockout Controls

The 

Lockout 

controls deactivate the hilow, head, and foot functions on the bed. When a lockout 

is activated, both the patient and caregiver controls for motor functions are locked out.

Location:

The 

Lockout

 control is located on the frame, or lower shroud, at the head end 

of the bed.
The 

Lockout

 control LED indicator is located on the caregivers side of both 

siderails.

To Activate:

Press the 

Lockout

 control switch to deactivate the motors. The lockout LED 

indicator on the siderail will light.

Activating the lockout function does 

not

 affect the operation of the emergency CPR Release.

Night Light

A photo cell control automatically turns the light on when the room darkens and turns it off when the room gets 
brighter. The night light does not function when the bed is powered by the battery.

Location:

The night light is located on the bottom center of the bed frame.

IV Pole

Built-In Labor Grips

LED Indicator

Содержание Affinity Four Birthing Bed



































































Отзывы: