UM DS-2CE56H0T-ITxF 042618NA
9
6.
Combine inclined ceiling mount’s cover with its
body with supplied screws.
7.
Repeat steps 6 to 9 of the
2.1.1 Ceiling/Wall
Mounting without Junction Box
to complete the
installation.
Figure 11 Fix the Camera to the Inclined Base
3.2
Installation of Type II Camera
Before you
start
:
Both wall mounting and ceiling mounting are suitable
for the turret camera. Ceiling mounting will be taken
as an example in this section. You can reference
ceiling mounting when wall mounting.
Steps
:
1.
Disassemble the turret camera by rotating the
camera to align the notch to the clip plate, as
shown below.
Figure 12 Disassemble the Camera
2.
Pry the mounting base to remove the mounting
base from the camera body.
3.
Paste the drill template (supplied) where you want
to install the camera.
4.
Drill the screw holes according to the drill template
and the cable hole (optional) on the ceiling.
