UM DS-2CE56H0T-ITxF 042618NA
7
Figure 5 Attach the Mounting Base to the Ceiling
Note:
•
The supplied screw package contains self-tapping
screws, and expansion bolts.
•
For a cement wall/ceiling, expansion bolts are
required to fix the camera. For a wooden
wall/ceiling, self-tapping screws are required.
6.
Route the cables through the cable hole or the side
opening.
7.
Align the camera with the mounting base, and
tighten the camera on the mounting base.
Figure 6 Secure the Camera with Mounting Base
8.
Connect the corresponding cables, such as power
cord, and video cable.
9.
Power on the camera to check if the image on the
monitor is at an optimum angle. If not, adjust the
camera according to the figure below to get an
optimum angle.
Figure 7 3-axis Adjustment
1).
Hold the camera body, and rotate enclosure
to adjust the pan position [0° to 360°].
2).
Move the camera body up and down to
adjust the tilt position [0° to 75°].
3).
Rotate the camera body to adjust the
rotation position [0° to 360°].
