User Manual of Area Scan GigE Camera
57
and pre-trigger through the client software.
As shown in Figure 3-19, click Digital IO Control. Select Line Selector and choose
output pin. Check Strobe Enabled and finish setting.
Figure 3-19
Strobe Output Mode
Available Strobe parameter setting:
(1)
Polarity setting
Tick Line Inverter to set polarity external trigger’s output signal, as shown in Figure
3-20.
Figure 3-20
Modifying Strobe Polarity
Содержание MV-CA003-20GC
Страница 91: ...User Manual of Area Scan GigE Camera 91...