HIKVISION MV-CA003-20GC, Руководство пользователя

Страница: 34 / 91

User Manual of Area Scan GigE Camera
34
Figure 1-17 Rear Panel
Table 1-14 Description of the Rear Panel
No. Description
1 RJ45 gigabit Ethernet interface
2 M2 screw holes for network cable securing
3 6-pin power and I/O interface
4 Status indicator LED
1.4.3 Power and I/O Interface Introduction
The description of the 6-pin power and I/O connector is shown in the table below.
1
2
3 4
5
6
Figure 1-18 Power and I/O Interface
Table 1-15 Description
No. Signal I/O Type Description
1 12V Input DC 12V
2 Opt-Iso In Input Opto-isolated input
3 GPIO Input/output Can be configured as input or output
4 Opt-Iso Out Output Opto-isolated output
5 I/O Ground Input Opt- isolated I/O grounding
6 GND Input Power and GPIO grounding
For the MV-CA030-10GM/GC camera, Pin3 is in the Not Connect status.