HIKVISION DS-2AF1-764 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 47

HIKVISION DS-2AF1-764 Скачать руководство пользователя страница 23

5-i nch High Speed Dome User Ma nual

© Hikvision Digital Technology Co., Ltd. All Rights Reserved.

17

MOTION

AUTO FLIP ON

PROPORTIONAL PAN OFF

PARK TIME 5

PARK ACT NONE

SCAN SPEED 40

IMAGE FREEZE OFF

DOME SPEED MID

BACK EXIT

MOTION

PRESET SPEED 4

LIMIT STOP OFF

<SETTING STOPS>

CLEAR STOPS

ELEVATION SET ON

BACK EXIT

Figure 3-11

PTZ Configuration

Descriptions of PTZ parameter configuration:



Auto-flip

In manual tracking mode, when a target object goes directly beneath the speed dome, the speed
dome automatically rotates (flips) 180 degrees horizontally to track the object.

Note:

AUTO-FLIP

is set as

ON

for this speed dome by default and it’s not user-definable.



Proportional Panning

Purpose:

When the speed dome is zooming in/out, you can enable the proportional panning function to
automatically reduce or increase the panning and tilting speeds according to the zooming amount.
This function enables the speed dome to trace the object at a proper speed when the speed dome
is zooming and the monitored scene is narrowed (zoom in) or enlarged (zoom out). The panning and
tilting speeds will be slower in telephoto state than that of the wide zoom state.
You can set

PROPORTIONAL PAN

to

ON

or

OFF

to enable/disable the function.

Note:

This function is enabled automatically while setting the patterns.



Park time and actions

Purpose:

This feature  allows  the  speed  dome  to  start  a  predefined  park  action  (scan,  preset,  pattern,  etc.)
automatically after a period of inactivity (park time).
You  can set

PARK TIME

from 5 to 720 seconds and set the park action (

PARK ACT

) as preset 1-8,

pattern 1-4, patrol 1-8, pan scan, tilt scan, random scan, frame scan, panoramic scan, day mode,
night mode or none.

Note:

If no control signal is received after the park time under the following circumstances, no park

actions will be performed: in the process of performing dome actions by calling special presets; or in
the process of performing external alarm linked actions.



Image freeze

This feature enables the live  view to switch directly from one scene defined by a preset to another,
without showing the middle areas between these two, to ensure the  surveillance efficiency. It can
also reduce the use of bandwidth  in a digital network system.
You can set

IMAGE FREEZE

on to enable this function.

«
...
21
22
23
24
25
...
»

Содержание DS-2AF1-764
















































Отзывы:

Нет отзывов