manualshive.com logo in svg

HIKVISION 673 Series, Руководство пользователя

Поделиться
Скачать
HIKVISION 673 Series Скачать руководство пользователя страница 84

Figure 7-14 Manual Attendance Mode

3. Enable the Attendance Status Required.
4. Enable a group of attendance status.

Note

The Attendance Property will not be changed.

5. Optional: Select an status and change its name if required.

The name will be displayed on the T & A Status page and the authentication result page.

Result
You should select an attendance status manually after authentication.

Note

If you do not select a status, the authentication will be failed and it will not be marked as a valid

attendance.

7.9.3 Set Auto Attendance via Device

Set the attendance mode as auto, and you can set the attendance status and its available schedule.

The system will automatically change the attendance status according to the configured schedule.
Before You Start

Add at least one user, and set the user's authentication mode. For details, see User Management.

DS-K1T673 Series Face Recognition Terminal User Manual

70

Содержание 673 Series





































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды