HIKVISION 673 Series, Руководство пользователя

Страница: 115 / 164

If you enable this function, you can save the picture captured by linked camera to the device.
Clear All Pictures in Device
Note
All pictures cannot be restored once they are deleted.
Clear Registered Face Pictures
All registered pictures in the device will be deleted.
Clear Captured Pictures
All captured pictures in the device will be deleted.
Set Face Recognition Parameters
You can set face recognition parameters for accessing.
Click Configuration → General → Face Recognition Parameters .
You can set Working Mode as Access Control Mode. The access control mode is the device normal
mode. You should authenticate your credential for accessing.
Click Save to save the settings after the configuration.
Set Card Security
Click Configuration → General → Card Security to enter the settings page.
Set the parameters and click Save.
Enable NFC Card
In order to prevent the mobile phone from getting the data of the access control, you can
enable NFC card to increase the security level of the data.
Enable M1 Card
Enable M1 card and authenticateingby presenting M1 card is available.
M1 Card Encryption
Sector
M1 card encryption can improve the security level of authentication.
Enable the function and set the encryption sector. By default, Sector 13 is encrypted. It is
recommended to encrypt sector 13.
Enable EM Card
Enable EM card and authenticating by presenting EM card is available.
DS-K1T673 Series Face Recognition Terminal User Manual
101