HIKVISION 673 Series, Руководство пользователя

Страница: 149 / 164

user cannot authenticate via the fake face within 5 minutes. Within the 5 minutes, the user
can authenticate via the real face twice continuously to unlock.
Application Mode
You can select indoor or others application modes according to actual environment.
4. Click OK.
5. Optional: Click Copy to, and then select the card reader(s) to copy the parameters in the page to
the selected card reader(s).
Configure Parameters for Alarm Output
After adding the access control device, if the device links to alarm outputs, you can configure the
parameters.
Before You Start
Add access control device to the client, and make sure the device supports alarm output.
Steps
1. Click Access Control → Advanced Function → Device Parameter to enter access control
parameter configuration page.
2. In the device list on the left, click to expand the door, select an alarm input and you can edit
the alarm input's parameters on the right.
3. Set the alarm output parameters.
Name
Edit the card reader name as desired.
Alarm Output Active Time
How long the alarm output will last after triggered.
4. Click OK.
5. Optional: Set the switch on the upper right corner to ON to trigger the alarm output.
Configure Parameters for Lane Controller
After adding the lane controller to the client, you can configure its parameters for passing through
the lane.
Before You Start
Add access control device to the client.
Steps
1. Click Access Control → Advanced Function → Device Parameter to enter Parameter Settings
page.
2. In the device list on the left, select a lane controller and you can edit the lane controller's
parameters on the right.
3. Edit the parameters.
DS-K1T673 Series Face Recognition Terminal User Manual
135