HikRobot CameraLink Area Scan Camera страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 95

background image

CameraLink Area Scan Camera

·

User Manual

ii

Legal Information

User Manual

© 2019 Hangzhou Hikrobot Technology Co., Ltd. All rights reserved.

About This Manual

The  Manual  includes  instructions  for  using  and  managing  the  Product.  Pictures,  charts,
images and all other  information hereinafter are  for description and explanation only. The
information contained in the Manual is subject to change, without notice, due to firmware
updates  or  other  reasons.  Please  find  the  latest  version  of  this  Manual  at  the  Hikrobot
website (https://www.hikrobotics.com/).

Please use this Manual with the guidance and assistance of professionals trained in
supporting the Product.

Trademarks

and other Hikrobot's trademarks and logos are the properties of Hikrobot in

various jurisdictions. Other trademarks and logos mentioned are the properties of their respective
owners.

Disclaimer

TO  THE  MAXIMUM  EXTENT  PERMITTED  BY  APPLICABLE  LAW,  THIS  MANUAL  AND  THE  PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH
ALL FAULTS AND ERRORS”. HIKROBOT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKROBOT
BE  LIABLE  TO  YOU  FOR  ANY  SPECIAL,  CONSEQUENTIAL,  INCIDENTAL,  OR  INDIRECT  DAMAGES,
INCLUDING,  AMONG  OTHERS,  DAMAGES  FOR  LOSS  OF  BUSINESS  PROFITS,  BUSINESS
INTERRUPTION,  OR  LOSS  OF  DATA,  CORRUPTION  OF  SYSTEMS,  OR  LOSS  OF  DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKROBOT HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND  HIKROBOT  SHALL  NOT  TAKE  ANY  RESPONSIBILITIES  FOR  ABNORMAL  OPERATION,  PRIVACY
LEAKAGE  OR  OTHER  DAMAGES  RESULTING  FROM  CYBER-ATTACK,  HACKER  ATTACK,  VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKROBOT  WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE  THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND  YOU ARE
SOLELY  RESPONSIBLE  FOR  ENSURING  THAT  YOUR  USE  CONFORMS  TO  THE  APPLICABLE  LAW.
ESPECIALLY,  YOU  ARE  RESPONSIBLE,  FOR  USING  THIS  PRODUCT  IN  A  MANNER  THAT  DOES  NOT
INFRINGE  ON  THE  RIGHTS  OF  THIRD  PARTIES,  INCLUDING  WITHOUT  LIMITATION,  RIGHTS  OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

«
1
2
3
4
...
»

Содержание CameraLink Area Scan Camera
































































































Отзывы:

Нет отзывов

Похожие инструкции для CameraLink Area Scan Camera

Бренд: ZEROXCLUB Страницы: 25

Бренд: Planet Страницы: 10

Бренд: Grundig Страницы: 98

Бренд: Kodak Страницы: 2

Бренд: KaiCong Страницы: 44

Бренд: Papago Страницы: 9

M380 - EASYSHARE Digital Camera

Бренд: Kodak Страницы: 27

Бренд: JAI Страницы: 64

Бренд: Konig Страницы: 48

Бренд: Sercomm Страницы: 30

Бренд: NanoCam Plus Страницы: 48

Бренд: Minolta Страницы: 36

Бренд: Vivitar Страницы: 21

XPANHDA180A-6MP

Бренд: XENO Страницы: 33

m-MINI DIGITAL S

Бренд: Olympus Страницы: 124

Бренд: Ability Страницы: 44

Бренд: AGFA Страницы: 18

Бренд: Vivitar Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды