CameraLink Area Scan Camera
·
User Manual
33
Figure 6-4
Set Strobe Line Duration
When the Strobe Line Duration value is 0, the strobe duration is equal to the exposure time. When
the Strobe Line Duration value is not 0, the strobe duration is equal to Strobe Line Duration value.
Set Strobe Line Delay
The camera supports setting strobe line delay to meet actual demands. When exposure starts, the
strobe output doesn’t take effect immediately. Instead, the strobe output will delay according to
the strobe line delay setting.
You can set strobe line delay as shown below.
Steps:
1.
Click Digital IO Control > Strobe Line Delay.
2.
Enter proper value in Strobe Line Delay, and its range is from 1 μs to 10000 μs.
