HikRobot CameraLink Area Scan Camera Скачать руководство пользователя | Manualshive

Страница: 5 / 95

background image

CameraLink Area Scan Camera

·

User Manual

v

Safety Instructions

These instructions are intended to ensure that the user can use the device correctly to avoid
danger or property loss.

Laws and Regulations

The device should be used in compliance with local laws, electrical safety regulations, and fire
prevention regulations.

Power Supply



When wiring or dismounting, make sure that the device power is cut off, and do not operate
under electrification.



Avoid contact with exposed circuit. When the device is powered on, avoid contact with
exposed junctions and parts.



Use the power adapter provided by the regular manufacturer.



Do not connect multiple devices to one power adapter, to avoid over-heating or fire hazards
caused by overload.



Make sure the plug is properly connected to the power socket.

Transportation



The device contains precision optical components and electronic components. During
transportation, storage and installation, incorrect operations like heavy pressure and violent
vibration should be avoided. Otherwise, the device may be damaged.



Avoid sudden collision, and pack the device with the accompanied carton and cushioning
material or similar package.

Using Environment



In order to reduce the risk of fire or electric shock, do not let the device get wet or damp.



Do not drop objects onto the device and avoid vigorous vibration.



Keep the device away from magnetic interference.



Do not use the device in extremely heat, extremely cold, dusty environment, corrosive
environment or high humidity environment.



Do not aim the device lens at objects of strong light, such as the sun and incandescent lamp.
Otherwise, the lens may be damaged.



The device should be stored in dry environment without corrosive gas. Avoid placing the
device in direct sunlight and poorly ventilated locations, or near heat sources such as heater or
heating (ignoring this warning may lead to fire hazards).



Do not operate in explosive environment.



Keep the surrounding area well ventilated to avoid heat accumulation. Do not contact the
radiator directly to avoid scald.

Electrostatic Protection



Remove all conductive objects (such as jewelry, watch, etc.) on the device body before
touching the device, and touch the grounding metal bracket by hand to release the static
electricity.

«
...
3
4
5
6
7
...
»

Содержание CameraLink Area Scan Camera
































































































Отзывы:

Нет отзывов

Похожие инструкции для CameraLink Area Scan Camera

Бренд: Capture Страницы: 2

Бренд: Greenleaf Страницы: 3

Бренд: Zipsnip Страницы: 26

Бренд: SecurView Страницы: 4

Бренд: Olin Страницы: 34

Бренд: TRASSIR Страницы: 2

Бренд: TRENDnet Страницы: 110

Бренд: Thinkware Страницы: 56

Бренд: Sercomm Страницы: 30

Digital signage LDV43-SAI200

Бренд: Dahua Technology Страницы: 38

MECABLITZ 36 AF-4C digital

Бренд: Metz Страницы: 140

Бренд: IAdea Страницы: 25

Бренд: Concord Camera Страницы: 2

Бренд: GE Страницы: 88

Бренд: Canyon Страницы: 43

Бренд: Hitachi Страницы: 2

Бренд: Hitachi Страницы: 2

Бренд: Hitachi Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды