English
51
3. Maintenance of the motor
The motor unit winding is the very “heart” of the power tool.
Exercise due care to ensure the winding does not become damaged and/or wet with oil or
water.
4. Inspection of terminals (tool and battery)
Check to make sure that swarf and dust have not collected on the terminals.
On occasion check prior, during and after operation.
CAUTION
Remove any swarf or dust which may have collected on the terminals.
Failure to do so may result in malfunction.
5. Cleaning on the outside
When the cordless die grinder is stained,
wipe with a soft dry cloth or a cloth
moistened with soapy water. Do not use
chloric solvents, gasoline or paint thinner,
for they melt plastics.
6. Cleaning
the
fi
lter
After use, detach the
fi
lter and remove
any grime or dust from the screen with an
airgun or other tool. (
Fig. 15
)
NOTE
○
To clear the unit of grime or dust,
periodically run the motor in a no-load
state and blow dry air into the ventilation
hole with the
fi
lter removed.
Accumulation of grime or dust
accumulates in the motor can cause
damage.
○
After cleaning, make sure to securely attach the
fi
lter.
7. Disposal of the exhausted battery
WARNING
Do not dispose of the exhausted battery. The battery may explode if it is
incinerated. The battery is recyclable. At the end of it’s useful life, under various
state and local laws, it may be illegal to dispose of this battery into the municipal
waste stream. Check with your local solid waste o
ffi
cials for details in your area for
recycling options or proper disposal.
Fig. 15
Detach
Wire-netting of
fi
lter
Shift in the direction
indicated by the arrow
Press in
all the way
Plug in the
fi
lter’s
protrusion
Attach
000Book̲GP18DA̲ChS.indb 51
000Book̲GP18DA̲ChS.indb 51
2021/03/15 19:31:09
2021/03/15 19:31:09