English
46
Wheels can be simply attached and detached by
using two wrenches. (
Fig. 9
)
NOTE
○
Do not tighten the collet chuck by
inserting a shaft thinner than the
regular shaft diameter (6.35mm) in the
chuck or in an empty condition. This
practice will damage the collet chuck.
○
When using a shaft (3 mm), switch
to a collet chuck for 3 mm shaft (sold
separately).
○
When installing a wheel with shaft,
tighten the collet chuck after applying a small quantity of spindle oil (or sewing machine oil)
to the tapered portion indicated in
Fig. 8 on page 45
.
3. Using the side handle (
Fig. 10, 11
)
(sold separately)
Attach the side handle to the machine as
follows.
(1) Remove the front cover.
Detach the protrusion on the interior of
the front cover from the hollow in the main
unit and pull to remove. If the protrusion
is di
ffi
cult to detach, use a
fl
at-head
screwdriver or similar tool.
(2) Loosen the side handle grip and insert
the side handle to the nose bracket
part of the machine from the
fl
ange
part of the side handle sleeve.
(3) Set the side handle to a position that
is suited to the operation and then
securely tighten the side handle grip.
Fig. 9
Spindle
Tighten
Collet chuck
Fig. 10
Interior protrusions
(2 locations)
Flat-head
screwdriver
Fig. 11
Side handle
Flange part
Tighten
Loosen
Side handle grip
Side handle sleeve
Nose bracket
000Book̲GP18DA̲ChS.indb 46
000Book̲GP18DA̲ChS.indb 46
2021/03/15 19:31:08
2021/03/15 19:31:08