English
47
OPERATION
WARNING
●
Wear eye protection when operating this tool.
●
Keep your hands, face and other body parts away from the wheel and any other
rotating parts, while operating the tool.
CAUTION
To extend the lifetime, the lithium-ion battery equips with the protection function to
stop the output. Therefore, if the tool is overloaded, the motor may stop. However,
this is not the trouble but the result of protection function. In this case, release the
switch of tool and eliminate the causes of overloading.
NOTE
○
To prevent injuries, this product has a function that prevents unexpected motor rotation
when the battery is inserted. The motor will not run if the battery is inserter while the switch
is still ON. After installing the battery, turn the switch o
ff
and then back on again.
○
The GP18DA and GP18DB models are equipped with a protection function that will shut
down the tool in the event of an overload.
Should the tool shut down due to an overload, turn the power o
ff
and then turn it back on
again.
An overload that stops tool operation and lasts more than 10 seconds may not be released
by turning the power o
ff
and on. Should this happen, remove the battery from the tool and
reinstall it before turning on the power switch.
1. Switch
operation
<GP18DA> (
Fig. 12
)
Turn the grinder “ON”
While holding the grinder
fi
rmly, slide the
switch to the “ON” position with one
fi
nger
to turn on the tool. Releasing the switch will
turn o
ff
the tool.
For continued operation, slide the switch to
the “ON” position and press down the “ON”
position of the switch to lock it in place.
Turn the grinder “OFF”
Press the “OFF” position of the switch to
release the lock and turn the grinder o
ff
.
ON
OFF
LOCK
Switch
Fig. 12
000Book̲GP18DA̲ChS.indb 47
000Book̲GP18DA̲ChS.indb 47
2021/03/15 19:31:08
2021/03/15 19:31:08