HIKOKI GP18DA, Инструкция по эксплуатации, Страница: 40 / 56

English
40
SPECIFICATIONS
POWER TOOL
Model GP18DA
•
GP18DB
Voltage 18 V
Rated Speed Transmission mode : 7000–29000 /min
Wheel peripheral speed 80 m/s
Battery
BSL1850C: Li-ion 18 V
(5.0 Ah, 5 cells)
Weight 2.3 kg (BSL1850C attached)
NOTE
Due to HiKOKI’s continuing program of research and development, the speci fi cations
herein are subject to change without prior notice.
Electronic control
○ Soft start
Reduces recoil against the operator by managing the number of rotations during startup.
○ Overload protection
This protection feature cuts o ff the power to the motor in the event of overloading of motor
or a conspicuous reduction in rotational speed during operation.
When the overload protection feature has been activated, the motor may stop.
In this case, release the tool switch and eliminate causes of overloading.
After that you can use it again.
○ Overheat protection
This protection feature cuts o ff the power to the motor and stops the power tool in the event
of overheating of motor during operation.
When the overheat protection feature has been activated, the motor may stop.
In this case, release the tool switch and cool it down in a few minutes.
After that you can use it again.
○ Restart prevention function
When the power is still switched on, the tool will not restart when a battery is installed. This
function can be canceled once the tool is switched o ff .
○ Braking Function
Brake is activated when the switch is turned o ff , stopping the motor’s rotation.
○ Kickback Protection
The kickback protection feature cuts o ff the power to the motor and stops the power tool
in the event of a sudden drop in the rotational speed of the wheel during operation (for
example, if the wheel locks during cutting operation, etc.).
CHARGER
Model UC18YFSL
Charging voltage 14.4 V–18 V
Weight 0.5 kg
000Book̲GP18DA̲ChS.indb 40 000Book̲GP18DA̲ChS.indb 40 2021/03/15 19:31:07 2021/03/15 19:31:07