English
35
—
Ensure that sparks resulting from use do not create a hazard e.g. do not hit
persons, or ignite
fl
ammable substances;
—
Ensure that ventilation openings are kept clear when working in dusty conditions, if
it should become necessary to clear dust,
fi
rst disconnect the tool from the mains
supply (use non metallic objects) and avoid damaging internal parts;
—
Always use eye and ear protection. Other personal protective equipment such as
dust mask, gloves, helmet and apron should be worn;
—
Pay attention to the wheel that continues to rotate after the tool is switched o
ff
.
—
Do not allow foreign matter to enter the hole for connecting the rechargeable battery.
—
Never disassemble the rechargeable battery and charger.
—
Never short-circuit the rechargeable battery.
Short-circuiting the battery will cause a great electric current and overheat. It
results in burn or damage to the battery.
—
Do not dispose of the battery in
fi
re.
If the battery burnt, it may explode.
—
Do not insert object into the air ventilation slots of the charger.
Inserting metal objects or in
fl
ammables into the charger air ventilation slots will
result in electrical shock hazard or damaged charger.
—
Bring the battery to the shop from which it was purchased as soon as the post-
charging battery life becomes too short for practical use. Do not dispose of the
exhausted battery.
ADDITIONAL SAFETY WARNINGS
1
Ensure that the wheel to be utilized is the correct type and free of cracks or surface
defects. Also ensure that the wheel is properly mounted and the collet chuck is
securely tightened.
2. To prolong the life of the machine and ensure a
fi
rst class
fi
nish, it is important that
the machine should not be overloaded by applying too much pressure. In most
applications, the weight of the machine alone is su
ffi
cient for e
ff
ective grinding.
Too much pressure will result in reduced rotational speed, inferior surface
fi
nish,
and overloading which could reduce the life of the machine.
3. The wheel continues to rotate after the tool is switched o
ff
.
After switching o
ff
the machine, do not put it down until the wheel has come to a
complete stop. Apart from avoiding serious accidents, this precaution will reduce
the amount of dust and swarf sucked into the machine.
4. When the machine is not use, the power source should be disconnected.
5. Be sure to switch OFF and pull out the battery to avoid a serious accident before
the wheel is assembling and disassembling.
6. Be careful of brake kickback.
This cordless die grinder features an electric brake that functions when the switch
is released. As there is some kickback when the brake functions, be sure to hold
the main body securely.
000Book̲GP18DA̲ChS.indb 35
000Book̲GP18DA̲ChS.indb 35
2021/03/15 19:31:06
2021/03/15 19:31:06