High End Systems intellaspot XT-1, Руководство пользователя

Страница: 47 / 98

CHAPTER 3
Menu System
intellaspot TM XT-1 User Manual 33
Copying the Boot Code
When new software is uploaded to intellaspot XT-1 fixtures, it may contain a new boot code which
must be copied to each fixture. This is apparent if the fixture displays a
BOOTDIFF
error.
To accept and store the new boot code:
1. Navigate to and select the
Test Options Menu
, (see Test Options Menu on page 32).
2. Using the left and right arrows on the Center button, scroll to the
Copy Boot
option and
press the Enter button to select.
3. Use the up and down arrows on the Center button to scroll to the
YES
option and then press
the Enter button to store the command. The fixture will store the new boot code and then
automatically home.
Self Test
This option lets you test the mechanical function of
separate component or all of the components in sequence.
To perform a self test:
1. Navigate to and select the
Test Options Menu
,
(see Test Options Menu on page 32).
2. Using the left and right arrows on the Center button,
scroll to the
SELF Test
option and press the Enter
button to select.
3. Use the up and down arrows on the Center button to scroll to the specific component or to
All
and press the Enter button to select. The fixture will test the mechanical operation of the
selected component. If you selected All, every function is tested in sequence.
Display Test
To start a routine that tests display function:
1. Navigate to and select the
Test Options Menu
,
(see Test Options Menu on page 32).
2. Using the left and right arrows on the Center
button, scroll to the
Display Test
option and
press the Enter button to select.
3. Use the up and down arrows on the Center button
to scroll to
On
and press the Enter button.
CAUTION:Do not remove power from the fixture while performing a
boot copy.
DMX
[ ]
Self Test:
Pan
DMX
[ ]
Display Test:
Off