High End Systems intellaspot XT-1 Скачать руководство пользователя страница 28

Страница: 28 / 98

CHAPTER 2

Setup and Configuration

intellaspot

XT-1 User Manual

Setting a Start Channel in Battery Mode

Note: This option only applies when no power is

applied to the fixture.

1. Turn on the menu system by pressing and holding

the MENU and ENTER buttons at the same time. The
display will show

Set

DMX

Start

Channel:

###

with the start channel currently assigned to the
fixture and the current versions for fixture and
display software.

2. Use the UP and DOWN arrow buttons on the

Navigation button

to select a valid DMX start channel from 1-474. The display will flash a new option ready for
selection.

3. Press the ENTER button to accept the new DMX Start channel. The display will stop flashing

when a new option is entered. The new address will not be stored until the ENTER button is
pressed.

Setting a Start Channel in Normal Mode

1. After powering on the fixture, unlock the menu by

pressing and holding down the MENU button until
the extended 2-line display appears.

DMX

Address

Menu

is the first option at the top menu level.

2. Press the ENTER button to select. The display will

show

Set

DMX

Start

Channel:###

with the start

channel that is currently assigned to the fixture.

3. Use the UP and DOWN arrow buttons on the

Navigation button to select a valid DMX start
channel from 1-474. The display will flash a new option ready for selection.

4. Press the ENTER button to accept the new DMX Start channel. The display will stop flashing

when a new option is entered. The new address will not be stored until the ENTER button is
pressed.

Set

DMX

Start

Channel:

001

S/W:

v1.3.235

Display:

v1.1.0

Set

DMX

Start

Channel:

000

Содержание intellaspot XT-1



































































































Результаты поиска

Содержание intellaspot XT-1

Отзывы:

Похожие инструкции для intellaspot XT-1

Бренды по названию

Популярные бренды

High End Systems intellaspot XT-1, Руководство пользователя

Результаты поиска

Содержание intellaspot XT-1

Отзывы:

Похожие инструкции для intellaspot XT-1

Бренды по названию

Популярные бренды