Dichroic Theatre ™ User Manual
ColorMerge Installation
C-
1
C
Appendix C:
ColorMerge Installation
ColorMerge Setup
The ColorMerge module ships with the following items:
•
ColorMerge product
•
Declaration of Conformity
Adding a ColorMerge Module to a Source Four Fixture
Warning: INTENSE HEAT. AVOID CONTACT BY PERSONS AND MATERIALS.
Warning: CHALEUR INTENSE. ÉVITER TOUT CONTACT ET TENIR TOUTE
MATIÈRE À L’ÉCART.
Perform this procedure
before
you connect the fixture to power. Refer to Figure C-1 as you
complete these steps. To install a ColorMerge moduld in a Source Four ellipsoidal fixture:
1. Remove the front
barrel assembly of
the Source Four
ellipsoidal fixture
by loosening the
thumbscrew and
the Philips set
screw located
above and
beneath the lens
barrel. You must
rotate the barrel
assembly until it
releases from the
mounting tabs
located in the rear
housing assembly.
2. Insert the ColorMerge module into the Source Four rear housing assembly by
aligning the mounting tabs into the rear-locking ring of the ColorMerge module. You
must rotate the ColorMerge module until the Source Four mounting tabs are
captured in the ColorMerge locking ring channels.
Retainer bolt
Yoke
Yoke locking knob
Barrel rotation knob
Barrel
Reflector housing
Safety cable mount
Figure C-1 Installing ColorMerge
Содержание Dichroic Theatre Series
