2-10
Setup and Configuration
Dichroic Theatre™ User Manual
•
Verify the truss or support will handle the combined weight of
all
the devices on
the truss.
•
High End Systems strongly recommends using safety cables to attach any of its
fixtures to a truss. Safety cables are provided with the ColorPower supply. If
necessary, you can order additional safety cables from your High End Systems
dealer/distributor (see “Optional Accessories” on page 1-7).
•
You must supply your own clamps to attach the Color Power supply to the
support. Verify that the clamp(s) you use are capable of supporting the weight of
the unit. Each ColorPower supply weighs 13 lbs (5.9 kg). You can order
cheeseboroughs for a two-inch truss from your High End Systems dealer/
distributor (see “Optional Accessories” on page 1-7).
•
Make sure the ColorPower supply and attached fixtures cannot be rotated all the
way around (360
o
). Allowing a unit to rotate 360
o
could loosen the clamp
mounting bolts.
Note: Because of the variety of conceivable lighting designs, you should consider the
procedure below as a suggested guideline only. High End Systems, Inc. cannot
make specific recommendations for your particular lighting design or venue.
To mount the ColorPower supply to a truss or another type of support:
•
Attach a suitable clamp through the handle.
•
Always stand on a firm, stable surface when mounting a fixture to its support.
The fixture should be at a height where you can comfortably work on it, and
should either be resting on a stable surface or held in a stable manner.
•
Tighten the clamp(s) firmly to the yoke and to the support.
•
Loop one or more suitable safety cables around the support and through the
handle.
Caution:
After mounting the fixtures, inspect all connected cables to
ensure that the cables are properly routed away from any hot
surface.
Do not mount ColorPower above or next to a hot fixture closer
than 1 ft (.3 m).
Powering On Dichroic Theatre Units
Caution:
Do not power on the ColorPower supply or any fixtures linked to
it until you have verified that the line cord cap is suitable for the
power source in your location.
Warning: This equipment for connection to a branch circuit having a
maximum overload protection of 20 A.
Содержание Dichroic Theatre Series
