High End Systems Dichroic Theatre Series, Руководство пользователя

Страница: 31 / 60

Dichroic Theatre™ User Manual Setup and Configuration 2-11
2
Before powering on ColorPower or any Dichroic Theatre Series fixtures connected to
ColorPower, verify that:
• The lamp is installed in each ColorCommand fixture on the ColorPower
supply link as described in “Installing the Lamp” on page B-1.
• The appropriate power cord caps are installed on the ColorPower supply and
all fixtures linked to it as described in “Installing a Power Cord Cap” on page
2-1.
• The DIP switch array on all fixtures has been set as described in “Unit
Addressing” on page 2-3.
• The ColorPower supply is linked appropriately to all fixtures in the fixture
link as described in “Setting up the Power Supply Link” on page 2-2.
At this point it is safe to connect ColorPower to an appropriately-rated power source
(that turns ColorPower on).
On initial power up, the display board should read
HES
, indicating that the on board
processor is running. After the CPU board boots, it will identify the display board
and send it a reset command, the display should then flash off momentarily and
redisplay
HES
. Soon thereafter the CPU will send initial display data to the display
board and it will read
COLR
.
When Dichroic Theatre color mixing units are connected to ColorPower, they
automatically begin a homing procedure to verify that the major functions of the
fixture are oriented properly.
ColorPower’s menu system provides an option for re-homing the fixtures. See “Reset
and Home (RST)” on page 3-6 for instructions on using the Menu system and
locating
the Home function.