High End Systems Dichroic Theatre Series, Руководство пользователя

Страница: 38 / 60

3-6 Operation Dichroic Theatre™ User Manual
Control (CTRL) Menu
Use this Menu option to reset ColorPower and home all ColorMerge modules and
ColorCommand fixtures connected to the fixture link.
Reset and Home (RST)
To view the Software version currently running on the fixture:
1. If you are not already in the Menu system, press and hold the <Menu> button
until
dMX
appears on the LED display.
2. Using the <Up> and <Down> arrow buttons, scroll to the
CtRL
menu and press
the <Enter> button to select.
3. Using the <Up> and <Down> arrow buttons, scroll to the
RSt
option and press
the <Enter> button to select. ColorPower will reset and home all connected
units.
Unique Number (UNIQ)
Every ColorPower supply has a unique number that is used for upload purposes. To
view the ColorPower supply’s unique number:
1. If you are not already in the Menu system, press and hold the <Menu> button
until
dMX
appears on the LED display.
2. Using the <Up> and <Down> arrow buttons, scroll to the
CtRL
menu and press
the <Enter> button to select.
3. Using the <Up> and <Down> arrow buttons, scroll to the
UNIQ
option and
press the <Enter> button to select. ColorPower will display the unique number
for the selected unit.
Test (TEST) Menu
Discovery (DiSC)
Discovery addressing is a test mode where addresses are assigned sequentially
starting with the address immediately following that of the ColorPower box. Each
Dichroic Theater product attached to the ColorPower is assigned an address
according to its module address and fixture type.
This mode ignores all address information stored in the EEPROM and dynamically
assigns DMX addresses based on the current link configuration. Use the following
steps to access the Discovery mode:
1. Press and hold the <Menu> button until
dMX
appears on the LED display.
2. Navigate to the
TEST
menu by pressing the UP button.
3. Press the <Enter> button to enter the test sub-menu. The first option will be
dISC
.
4. Press and hold the <Enter> button to select discovery mode addressing.