7
hib.co.uk
To adjust the brightness levels,
see Fig. 3.
1. Press the
Brightness
switch once to change the brightness level to a pre-set
level. The direct frontal and backlit ambience will work in unison.
2. There are 4 pre-set brightness levels that cycle through 100%, 75%, 50% and
25%.
3. To set a customised brightness level simply press and hold the
Brightness
switch.
4. After 3 seconds the mirror will cycle through the brightness levels range.
When the desired level of illumination is achieved remove your finger.
NB:
Once your level is set when you turn the mirror off and then back on again the
mirror will revert to the last saved level.
To adjust the colour temperature (CTC)
1. Press the
CTC
switch once to change the colour temperature to a preset level.
The direct frontal and backlit ambience will work in unison.
2. There are 4 pre-set temperatures that cycle through warm, daylight,and cool
colour temperatures.
3. To set a customised colour temperature level simply press and hold the
CTC
switch.
4. After 3 seconds the mirror will cycle through the full colour temperature
ranges.
5. When the desired colour is achieved remove your finger.
Fig. 3. - Mirror control switches
POWER
On / Off
CTC
Colour temperature changing
BRIGHTNESS
Level of illumination
Fig. 4. - Operation
