HIAB Hooklift Multilift XR S Series страница 117 Скачать руководство пользователя

Страница: 117 / 160

117

4/2018

113175421

XR14S/16S/18S/21S/26S/30S

Hooklift Multilift XR S

Service Manual

Safety

• Suitable eye and hand protection must be worn whilst carrying out this operation.
• Ensure suitable containers to hold the amount oil you will be draining are available

before starting this operation.

Environment

• Ensure oil waste oil is disposed of safely and in accordance with any local

environmental regulations.

Attention!

Ask the oil supplier for instructions. If you do not receive any

instructions, follow these recommendations:

Procedure

1. Completely empty the oil tank via the drain plug. Clean the oil tank carefully

from oil and contamination. On older systems with heavy contamination, it may

be necessary to remove the oil tank and flush out with a suitable flushing

agent.

2. Completely empty the hydraulic cylinders, tubes, hoses and the suction hose to

the pump.

3. Change the return filter.

4. Fill the tank with new oil via the return filter. Operate all cylinders carefully to

ensure that they will be filled with oil. Ensure that the pump is filled all the time.

Fill up the tank before it gets empty.

5. Drive for 2 or 3 days.

6. Check that all piston rods of the cylinders are in retracted position. Completely

empty the oil tank via the drain plug and change the return filter. Fill up the oil

tank with new oil and operate all cylinders carefully to ensure that they will be

filled with oil. Ensure that the pump is filled all the time. Check that the oil level

in tank remains in correct level.

Note!

Synthetic esters can dissolve old contamination. If the performance of

the hooklift appears to deteriorate before the oil filter change, inspect

the filters and change if necessary.

Содержание Hooklift Multilift XR S Series

































































































































































Результаты поиска

Содержание Hooklift Multilift XR S Series

Отзывы:

Похожие инструкции для Hooklift Multilift XR S Series

Бренды по названию

Популярные бренды

HIAB Hooklift Multilift XR S Series, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание Hooklift Multilift XR S Series

Отзывы:

Похожие инструкции для Hooklift Multilift XR S Series

Бренды по названию

Популярные бренды