background image

115

4/2018 

113175421

XR14S/16S/18S/21S/26S/30S

Hooklift Multilift XR S

Service Manual

!

BE CAREFUL! 

Hydraulic oils and mineral and more environment 

friendly oils can cause skin irritation and allergic 

symptoms. Hands and other exposed skin must be 

protected well. Wash your hands carefully after the 

oil change.

Changing the hydraulic oil

1.   Check that all piston rods of the cylinders are in retracted position.

2.   Completely empty the oil tank via the drain plug.

3.   Change the return filter.

4.   Fill the tank with new oil via the return filter.

5.   Check the air filter.

Hydraulic oil specifications

Quality classes:    

ISO 6743-4 type HV or

   

 

 

DIN 51524 part  3 type HVLP or 

   

 

 

Swedish SMR standard for hydraulic oil (SHS).

Degree of cleanliness: 

16/13 (ISO 4406). 

Viscosity:   

Ambient temperature °F  (°C) 

ISO-VG

 

-13  (-25)  

...  

50  (+10) 

22

 

5  (-15)  

...  

68  (+20) 

32

 

23 

(-5)  

...  

86  (+30) 

46

 

59 (+15)  ...  122  (+50) 

68

Содержание Hooklift Multilift XR S Series

































































































































































Отзывы: