end_device-9:44:16
expander-9:42
9:0:1290:0
9:0:1302:0
9:0:1383:0
end_device-9:41:19
end_device-9:41:31
end_device-9:44:2
expander-9:43
9:0:1291:0
9:0:1303:0
9:0:1384:0
end_device-9:41:20
end_device-9:41:32
end_device-9:44:3
expander-9:44
9:0:1292:0
9:0:1304:0
9:0:1385:0
end_device-9:41:21
end_device-9:42:2
end_device-9:44:4
sas_host9
9:0:1293:0
9:0:1323:0
9:0:1386:0
end_device-9:41:22
end_device-9:44:0
end_device-9:44:5
9:0:1294:0
9:0:1375:0
9:0:1387:0
end_device-9:41:23
end_device-9:44:1
end_device-9:44:6
9:0:1295:0
9:0:1376:0
9:0:1388:0
end_device-9:41:24
end_device-9:44:10
end_device-9:44:7
9:0:1296:0
9:0:1377:0
9:0:1389:0
end_device-9:41:25
end_device-9:44:11
end_device-9:44:8
b) Issue the following command to access a single host's SMP Discover output:
smp_discover_list /dev/bsg/expander-9:39
c) Zone group 9 can be identified by the
ZG:9
located at the end of each line in zone 9. The above example
displays PHYs 0-13 as being in zone group 9. All other devices are labeled as
inaccessible
because
the host is displaying the only devices it has access to. The step can be repeated on other hosts to see
what zone group each host has access to.
d) Issue the following command to access all hosts smp_discover_list:
smp_discover_list --ignore /dev/bsg/expander-9:39
e) Zone group 9, 10, 11, 12, 13, and 14 can be identified by the
ZG
located at the end of each group in
each of their respective zones. The above example displays PHYs 0-13 as being in zone group 9, PHYs
14-27 as being in zone group 10, and so on.
5.2.7
Disabling Zoning using Windows
PENDING - Remove references to sg and replace with SCSI device handles.
1. From the host server, identify the SCSI devices that are associated with the Ultrastar Data60 IOMs.
Note: The operating system associates each SEP device as a SCSI device. The SCSI device of
the SEP can be used to get status from or control elements within the enclosure.
a) Issue the following command:
sg_scan -s | findstr /i H4060-J
b) Identify the SCSI devices from the output. The device information follows SCSI0. The devices appear
as SCSI0:1,62,0 and SCSI0:1,124,0 bolded in the example below.
SCSI0:1,62,0
claimed=0 pdt=dh
HGST
H4060-J
0101
0428
SCSI0:1,124,0
claimed=0 pdt=dh
HGST
H4060-J
0101
0428
2. Locate the IP Address for each IOM using sg_ses page 7.
179
5
System Management
User Guide
5.2
Zoning
