Introduction
LD8 Operations Manual
AB- V-MA-00635_RevA6
4
1.5 Enabling the LD8 for VERIPOS services
VERIPOS correction signals are provided as a chargeable service.
In order f or the LD8 to decode corrections and output a corrected position, it must be activated. The user can
send a request for an activation of services to the VERIPOS Helpdesk and the activation will then be sent via L-
band satellite to the requested unit.
When not in use, some service agreements may allow for deactivation of the service. The activation/deactivation
procedure is detailed in section
Activation and Deactivation of VERIPOS Services
.
NOTE
To use VERIPOS correction signals a contract between the users’ company and VERIPOS
must
be in place.
VERIPOS call this a Service Access License (
SAL
).
To avoid delays users should record the SAL number associated with the VERIPOS equipment.
The Helpdesk are unable to activate any equipment unless an active SAL exists, and its ref erence number
can be determined.
