Hexagon PEPS 200, Руководство пользователя

Страница: 8 / 34

3. How to install your PEPS?
A. Unpacking
Unpack the unit with the necessary precautions. Do not use sharp tools (Cutter, ...).
In the presence of a driver or a technician, check the entire robot - control box, trolley,
chassis, radio control ... . to detect any damage due to transport.
In case of doubt, do not hesitate to make reservations on the transport
voucher by
briefly
describing the damages sustained.
Only the consignee can file a
complaint with the carrier within 48 hours, and by registered letter. In addition, you
must also notify us within 48 hours otherwise we will not be able to do anything.
If your device is not in perfect condition, or if it does not work, notify your dealer
immediately and do not try to turn it on again without the advice of a qualified
technician approved by us.
We recommend that you keep the original packaging and materials for future transport
under perfect conditions.
The packaging must contain the following elements:
• the robot PEPS with its power cable;
• Its trolley;
• the control box and its touch screen;
• the remote control;
• an envelope containing at least the technical manual and the screws for the trolley.
B. Electrical connections
For your safety and the correct operation of your PEPS follow the instructions below:
• Place the control box at a distance of at least 3.5 meters from the edge of the pool,
avoiding direct exposure to the sun or rain. It can be either placed on the ground or
hung on the trolley but in the shade.
• When attaching the control box to the trolley, make sure that the control box is held
securely with the fastening screws supplied with the plate provided and that the trolley
is at least 3.5 meters from the edge of the basin.
• Connect the robot cable to the control box and lock the connector.
• Make sure that the red «I / O» switch on the side is set to «O»
• Only connect the control box to an electrical outlet equipped with a ground terminal
and protected by a residual current protection system of 30 mA maximum (if in doubt,
contact your electrical installer).
• If you use an extension cord to connect your vacuum cleaner to the mains, make sure
that the control box can not be placed within 3.5 m of the pool edge.
www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55
9