4. How to use your PEPS?
2 - Manual operation
In this mode, your robot will move in the direction you
will indicate to it using your remote control.
• Toggle the red switch «I / 0» which is on the side of the
control box to the position «I».
• There are different keys on your remote control:
- The «4 direction arrows» correspond to the orientation
of the robot you wish to give it. To move forward, back
or rotate your robot, you must press one of the 4 arrows.
- The «UP» arrow corresponds to the forward movement
of the robot. The rotative brushes of the robot tell you its
forward direction. The back of the robot is where there is
the auto floating cable.
- The «+» button on the remote control corresponds to
the stop of the robot drive motors, but not to the pump.
Thus allows to suck in a very precise place, where a
suction mouth is stopped.
- The «STOP» button is used to completely immobilize
the robot, ready to leave the water or to switch it on
automatic mode.
- The button «1» is used to launch the robot in automatic
mode with immediate start.
- The button «2» is used to launch the robot in automatic
mode with delayed start.
- The «1 and 2» buttons correspond to the automatic
program start. By pressing these buttons, you can not return to the remote control
without pressing first the bouton «STOP».
- After use, set the «I / O» switch to the position «O» and disconnect the power cord
from the mains plug.
IMPORTANT!
A non-activity timer has been set in the radio control mode,
without any command on your part, the robot will turn itself
off after 90 seconds.
www.myhexagone.com
H E X A G O N E
M A N U FA C T U R E
H E X A G O N E
2
1
AUTO
AUTO
STOP
www.myhexagone.com • [email protected] • Tél. +33 1 34 34 11 55
13
