4. How to use your PEPS?
A - Pool entry of the Robot
• The trolley and the control box of PEPS must be positioned in such a way that the
Robot can reach all the surfaces of the pool while the minimum distance between the
trolley and the edge of the pool is kept at 3.5m.
• Be careful to unroll the entire self-floating cable at the pool edge, avoiding loops,
before putting the unit into the water.
• Place the cable and robot into the water.
• It is essential that the Robot descends by itself and lands flat on the bottom of the
pool.
IMPORTANT INFORMATION!
• Do not operate the robot PEPS out of the water, as this could
damage the pump seals and motors and automatically cancel
the manufacturer’s warranty.
• Do not allow swimming when your PEPS is in the pool.
• When working, the robot should always be flat on the bot-
tom of the pool.
B - Start-up
You can choose whether to operate your PEPS either in automatic mode or in manual
mode.
In automatic mode, the robot will operate for a factory preset time of 10 minutes to
3 hours.
• Plug the electric socket into a ground connection protected by a grounding circuit
breaker.
• Make sure that no one is in the water and that the robot is laid flat on the bottom of
the pool.
• Toggle the red switch «I / 0» which is on the side of the control cabinet to the position
«I». The indicator lights up, which means that your robot is powered on.
• The digital dashboard should light, the Hexagone’s logo should be displayed and the
screen should arrive on its home menu, waiting for your instructions.
www.myhexagone.com • [email protected] • Tél. +33 1 34 34 11 55
11
