5. Cleaning and Maintenance
D - Change of wear parts
The wheels are one of the major elements of the correct operation of the drive.
Depending on the time and frequency of cleaning, the wear time is different from one
robot to another, but with our experience, we can adviser to change the wheels every
18 months or 1 time per 2 seasons.
We also advise you to change the rotating brush belts after a season of use.
The brushes must be changed if their surface becomes almost smooth or worn.
WARNING!
Always use an original stainless steel turbine, belts and
screws for replacement.
When replacing the turbine, make sure that the robot is not
connected to the power supply.
Under no circumstances should you handle the robot chassis
when the robot is connected to its control box. In addition, we
advocate to make sure that the robot, in except of operation
on the pool bottom in automatic or manual mode by using the
radio remote control, must be turned off and disconnected
from the power supply.
If you touch the turbine blades in operation, you are at risk of
serious injury. It is strictly forbidden to do!
www.myhexagone.com • [email protected] • Tél. +33 1 34 34 11 55
16
