Hewlett Packard Enterprise HPE ProLiant XL170r Gen10, Руководство по техническому обслуживанию и ремонту

Страница: 45 / 129

a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Disconnect all peripheral cables from the server.
4. Remove the server from the chassis.
5. Remove the air baffle.
6. Remove the bayonet board.
7. Remove the secondary riser cage.
8. Remove the auxiliary card from slot 2.
Retain the secondary riser retention cover and screw for future use.
9. Disconnect the cables from the auxiliary card:
a. Open the retention clip and slide it away from the connectors.
b. Gently pull the top corner of the cable latch door upwards.
c. Disconnect the black and white cables from the auxiliary card.
10. Remove the primary riser cage.
11. Remove the adapter from slot 1.
Removal and replacement procedures
45