Hewlett Packard Enterprise HPE ProLiant XL170r Gen10, Руководство по техническому обслуживанию и ремонту

Страница: 35 / 129

4. Install the server into the chassis.
5. Connect all peripheral cables to the server.
6. Power up the server.
Install the primary riser cage
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure
1. Install the primary riser cage. Make sure that the riser board is firmly seated in its system board the connector.
2. Do one of the following:
• Install the secondary riser blank.
•
Install the secondary riser cage.
3. If removed, install the bayonet board.
4. If removed, install the bayonet board.
5. Install the air baffle.
6. Install the server into the chassis.
7. Connect all peripheral cables to the server.
8. Power up the server.
Install the secondary riser blank
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Removal and replacement procedures
35