To replace the component, reverse the removal procedure.
Removing and replacing the GPU
Prerequisites
Before performing this procedure, make sure you have the T-15 Torx screwdriver available.
Procedure
on page 29.
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Disconnect all peripheral cables from the server.
4.
Do one of the following:
• Server in rack mode:
Remove the server from the rack
on page 30.
Position the tower server for hardware configuration
on page 31.
on page 32.
on page 34.
7. Remove the system air baffle
on page 35.
8.
Remove the GPU.
60
Removal and replacement procedures
Содержание HPE ProLiant ML110 Gen10
