Remove the server from the rack
on page 30.
• Server in tower mode:
Position the tower server for hardware configuration
5.
on page 32.
6.
7.
on page 34.
8.
on page 35.
9.
Disconnect all existing drive cables.
10. Remove the non-hot-plug drive cage
11.
Label the drives before removing them. The drives must be returned to their original locations.
12.
Remove the drives.
To replace the component, reverse the removal procedure.
Removing and replacing the front panel LEDs cable
Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure
1.
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Disconnect all peripheral cables from the server.
4.
Do one of the following:
Removal and replacement procedures
45
Содержание HPE ProLiant ML110 Gen10
